Woven Corrugator Belt
Woven Middle Speed Corrugator Belt
Middle speed corrugator belt is 5-layer structure belt, each structure of the layer are the same, each layer has the same material, and the absorbent fiber is woven into the surface layer. The surface is straight line, This, in turn, guarantees correct gluing and fast drying of the board.
Product Features:
1. Straight cut edge and long service life.
2. Level surface, clean mark.
3. Hot-press and flocking joint
Woven High Speed Corrugator Belt
Woven high speed corrugator belt was developed to transfer board and the rapid drying of the board. The structure and the quality fabric of the belt facilitate steam evaporation from the board. The belt is 3-layer belt. The structure of two surface layers is not the same as the middle layer. This structure is developed to produce flat boards on high-speed corrugating machines. The surface of the belt is twill, this reduces the noise while the belt running on the machines. The material of the two surface layers are not the same as the middle, this can increase the friction coefficient.
Product Features:
1. Straight cut edge and long service life.
2. Level surface, clean mark.
3. Hot-press and flocking joint.
4. High moisture absorption and release; Low noise and high speed of operation.
Strong Woven High Speed Corrugator Belt
Strong woven high speed corrugator belt is a consistent development based on the proven woven high speed corrugator belt range, The strong woven high speed corrugator belt is ideal for corrugating systems with high production speeds, even load systems and frequently changing paper widths. The woven-in edge reinforcement of aramid fibres(Kevlar) reduces wear substantially and ensures a long service life.
Product Features:
1. Straight cut edge and long service life.
2. Level surface, clean mark.
3. Hot-press and flocking joint.
4. High moisture absorption and release; Low noise and high speed of operation.
5. Woven-in edge reinforcement ensures extra long service life.